How to Configure the Mac OS X Network Panel for Dial Up Access

1. From the Apple menu, choose System Preferences.
2. Click the Show All icon.
3. Click the Network icon.
4. Click the arrow box on the Show pop-up list and choose Internal Modem.
5. Click on the TCP/IP tab.
6. Click the arrow box on the Configure pop-up list and choose Using PPP.
7. Click on the PPP tab.
8. In the Service Provider field, type tribcsp.com.
9. In the Telephone Number field, type the 7-digit local access number from line 3 of your password sheet.
10. In the Account Name field, type your Username from line 1 of your password sheet.
11. In the Password field, type your Password from line 2 of your password sheet.
12. Check the box next to Save password.
13. Click the PPP Options button.
14. Check the box Connect automatically when starting TCP/IP applications.
15. Uncheck the box Prompt to stay connected.
16. Uncheck the box Disconnect if idle.
17. Check the box Disconnect when user logs out.
18. Check the box Send PPP echo packets.
19. Check the box Use TCP header compression.
20. Uncheck Connect using a terminal window.
21. Uncheck Use verbose logging.
22. Click the OK button.
23. Click on the Proxies tab.
24. Uncheck all the boxes.
25. Click on the Modem tab.
26. Click the arrow box on the Modem pop-up list, and choose Apple Internal 56K Modem (v.90).
27. Check Enable error correction and compression.
28. Click Sound: On.
29. Click Dialing: Tone.
30. Check Show modem status in menu bar.
31. Click Apply Now.
32. Close the Network window.